Fluke-biomedical QED 6 Manuel d'utilisateur télécharger pdf (Page 65)

Operation

Remote Operation

2-39

4. Press the softkey corresponding to the parameter to be changed. Repeated

pressing of the softkey cycles through the settings. The following settings

are recommended:

• Baud Rate: 300, 600, 1200, 2400, 9600

• Parity: None, Even, Odd

• Stop Bits: 1 or 2

• Data Bits: 7 or 8

The Analyzer factory default setting is 2400, N, 8, 1.

5. Press the esc softkey to store the last displayed parameters in memory.

6. Press esc to return to Main Menu 2.

Ansur Software Control

Ansur test automation systems allow a solutions-based approach to complete

testing of the medical device under test (DUT). Ansur helps you create

standard work using the test template/sequence (which is based on your written

test procedure) and integrates all test results into a single test report that can be

printed or archived. Ansur manages test procedures by allowing both manual

and visual automated test sequences.

The software works hand-in-hand with Fluke Biomedical testers and

simulators, creating a seamless integration for:

• Visual inspections

• Preventive maintenance

• Work procedures

• Performance tests

• Safety tests

Ansur software utilizes plug-in modules to work with a wide array of Fluke

Biomedical instruments. The plug-in module is a software interface to the

Ansur program. Plug-ins provide test elements used by Ansur. This gives the

benefit of using the same user interface for all testers and simulators supported

by an Ansur plug-in. See the Fluke Biomedical Ansur QED 6 Plug-in User

Manual for detailed information.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 71 72

Pas de commentaire

Fluke-biomedical QED 6 Manuel d'utilisateur Page 65